Institute of Mechanics - Department of Civil Engineering, Geo and Environmental Sciences

Publications 2014

Altmann, R., Betsch, P., Yang, Y.: Minimal extension for mechanical systems with control constraints. In Proceedings of the 3rd Joint International Conference on Multibody System Dynamics and the 7th Asian Conference on Multibody Dynamics (IMSD-ACMD), Busan, Korea, 30 June - 3 July 2014 

Betsch, P., Becker, C., Franke, M., Yang, Y.: A comparison of DAE integrators in the context of benchmark problems for flexible multibody dynamics. In Proceedings of the 3rd Joint International Conference on Multibody System Dynamics and the 7th Asian Conference on Multibody Dynamics (IMSD-ACMD), Busan, Korea, 30 June - 3 July 2014

Schmied, C., Mattern, S., Schweizerhof, K.: Enhanced low-order displacement finite lements using incompatible mass scaling and static condensation in explicit time integration. Proc. Appl. Math. Mech. (PAMM) 14(1), 2014, DOI 

Helbig, M., van der Giessen, E., Clausen, A.H., Seelig, Th.: Continuum-micromechanical modeling of distributed crazing in rubber-toughened polymers. Eur. J. Mech. / A Solids, submitted for publication

Ognedal, A.S., Clausen, A.H., Berstad, T., Seelig, Th., Hopperstad, O.S.: Void nucleation and growth in mineral-filled PVC - An experimental and numerical study. Int. J. Solids Structures 51 (2014), 1494-1506, DOI

Schneider, K., Seelig, Th.: Numerical aspects of failure modeling of amorphous thermoplastics. PAMM, Proc. Appl. Math. Mech. 14(1), 133-134 (2014), DOI

Roller, M., Betsch, P., Gallrein, A. and Linn, J.: On the Use of Geometrically Exact Shells for Dynamic Tyre Simulation. In: Multibody Dynamics: Computational Methods and Applications, Series: Computational Methods in Applied Sciences, Terze, Z. (Ed.), Vol. 35 (205-236), Springer Verlag, 2014, Springer Webpage

Becker, C. and Betsch, P.: Application of a gyrostatic rigid body formulation in the context of a direct transcription method for optimal control in multibody dynamics. In: Multibody Dynamics: Computational Methods and Applications, Series: Computational Methods in Applied Sciences, Terze, Z. (Ed.), Vol. 35 (237-254), Springer Verlag, 2014, Springer Webpage

Hesch, C. and Weinberg, K.: Thermodynamically consistent algorithms for dynamic phase field models of fracture and finite deformations. Int. J. Numer. Meth. Engng, 99:906-924, 2014, DOI 

Hesch, C., Gil, A.J., Arranz Carreño, A., Bonet, J. and P. Betsch, P.: A mortar approach for Fluid-Structure Interaction problems: Immersed strategies for deformable and rigid bodies, Comput. Methods Appl. Mech. Engrg, 278:853-882, 2014, DOI 

Eugster, S.R., Hesch, C., Betsch, P. and Glocker, Ch.: Director-based beam finite elements relying on the geometrically exact beam theory formulated in skew coordinates, Int. J. Numer. Meth. Engng 97(2), 111-129, 2014, DOI

Dittmann, M., Franke, M., Temizer, I. and Hesch, C.: Isogeometric analysis and thermomechanical Mortar contact problems, Comput. Methods Appl. Mech. Engrg, 274:192-212, 2014, DOI

Konyukhov, A., Schweizerhof, K.: Geometrically exact theory of contact interaction - further development and achievement. Proceedings 2013 Spring World Congress on Engineering and Technology (SCET), Wuhan, China, May 31 - June 2, 2013, Open Journal of Applied Sciences, Vol. 3, Number 1B1, Curran, 2014

Konyukhov, A., Schweizerhof, K.: Geometrically exact theory of contact interaction - a general approach with a special focus on curve-to-surface contact. GAMM-Mitteilungen 37 No. 1, 7-26, 2014, DOI

Fingerhut, C., Schindler, H.J., Schweizerhof, K., Kordass, B., Lenz, J.: Finite element analysis of the principles and loosening forces of the conical telescopic crown: a computer-based study. Intern. Journal of Computerized Dentistry 17(3):199-218, 2014

 

Conference and Workshop Contributions 2014

Schulenberg, L., Sun, D.-Z., Seelig, Th.: Micro-mechanical modeling of long fibre reinforced thermoplastics (LFT) using local fiber orientation distribution from mold filling simulation. 27th International Workshop Research in Mechanics of Composites, Bad Herrenalb, 11. - 12. Dezember 2014

Martinez, S., Schindler, H.J., Schweizerhof, K., Lenz, J.: Ein variables Finite Element Modell für das menschliche Kausystem. Gemeinsame Jahrestagung der DGZ, DGÄZ, DGCZ und der AG Keramik - Sektion Informatik der DGCZ - Digitale Zahnmedizin, Hamburg, 5.-6. September 2014

Schulenberg, L., Sun, D.-Z., Seelig, Th.: A cell model study of damage initiation and failure in long fiber reinforced thermoplastics. 14th European Mechanics of Materials Conference, Gothenburg, 27. - 29. August 2014

Betsch, P., Janz, A.: Structure-preserving integration with mixed finite elements. WCCM 2014, Barcelona, Spain, July 20-25, 2014

Konyukhov, A., Schweizerhof, K.: Various variational formulations for curve and surface interactions. WCCM 2014, Barcelona, Spain, July 20-25, 2014

Schweizerhof, K., Konyukhov, A., Izi, R., Strobl, M.: A solid beam element for wire rope simulation with a special contact algorithm. WCCM 2014, Barcelona, Spain, July 20-25, 2014

Schmied, C., Mattern, S., Schweizerhof, K.: Enhanced low order solid finite elements using incompatible inertia in explicit time integration considering instability reduction. WCCM 2014, Barcelona, Spain, July 20-25, 2014

Altmann, R., Betsch, P., Yang, Y.: Minimal extension for mechanical systems with control contraints. In Proceedings of the 3rd Joint International Conference on Multibody System Dynamics and the 7th Asian Conference on Multibody Dynamics (IMSD-ACMD), Busan, Korea, 30 June - 3 July 2014

Bauchau, O.A., Wu, G., Betsch, P., Cardona, A., Gerstmayr, J., Jonker, B., Masarati, P., Sonneville, V.: Validation of flexible multibody dynamics beam formulations using benchmark problems. In Proceedings of the 3rd Joint International Conference on Multibody System Dynamics and the 7th Asian Conference on Multibody Dynamics (IMSD-ACMD), Busan, Korea, 30 June - 3 July 2014

Becker, C., Betsch, P.: Optimal control of multibody systems in terms of a structure-preserving transcription scheme. In Proceedings of the 3rd Joint International Conference on Multibody System Dynamics and the 7th Asian Conference on Multibody Dynamics (IMSD-ACMD), Busan, Korea, 30 June - 3 July 2014

Betsch, P., Becker, C., Franke, M., Yang, Y.: A comparison of DAE integrators in the context of benchmark problems for flexible multibody dynamics. In Proceedings of the 3rd Joint International Conference on Multibody System Dynamics and the 7th Asian Conference on Multibody Dynamics (IMSD-ACMD), Busan, Korea, 30 June - 3 July 2014

Schulenberg, L., Seelig, Th.: Modellierung des Schädigungs- und Versagensverhaltens langfaserverstärkter Thermoplaste. 14. Problemseminar "Deformation und Bruchverhalten von Kunststoffen", Merseburg, 25. - 27. Juni 2014

Martinez, S., Schindler, H.J., Lenz, J., Schweizerhof, K.: A variable finite element model of the human masticatory system. BioDental 2014 - 3rd International Conference on Biodental Engineering, Porto, Portugal, June 22-23, 2014

Schmied, C., Mattern, S., Schweizerhof, K.: Enhanced low order displacement finite elements using incompatible mass scaling and static condensation in explicit time integration. 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) 2014, Erlangen-Nürnberg, Germany, March 10-14, 2014

Helbig, M., Seelig, Th.: Continuum mechanical modeling of the crazing mechanism in thermoplastic polymers. Arbeitskreis Mikrostrukturmechanik der DGM, Freiberg, 13. Februar 2014

Franke, M.: Structure preserving time integration for Coulomb friction. Contact Mechanics International Symposium - CMIS, Abu Dhabi, Feb 3-5, 2014

Izi, R., Konyukhov, A., Schweizerhof, K.: Various efficient contact formulations in covariant form. Contact Mechanics International Symposium - CMIS, Abu Dhabi, Feb 3-5, 2014

Strobl, M., Izi, R., Konyukhov, A., Schweizerhof, K.: A solid beam element including cross section deformation dedicated for cable contact. Contact Mechanics International Symposium - CMIS, Abu Dhabi, Feb 3-5, 2014